SEC Filing - Microbot Medical Inc

View:

Download DOC

Download PDF

Download XLS

Download XBRL

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 10-Q

(Mark One)

[X]	QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934.

For the quarterly period ended September 30, 2018

[ ]	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934.

For the transition period from _____ to _____

Commission file number: 1-16525

MICROBOT MEDICAL INC.

(Name of Registrant in Its Charter)

Delaware

94-3078125

State or Other Jurisdiction of

Incorporation or Organization)

(I.R.S. Employer

Identification No.)

25 Recreation Park Drive, Unit 108

Hingham, MA 02043

(Address of principal executive offices)

(781) 875-3605

(Registrant’s Telephone Number, Including Area Code)

Indicate by check whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes [X] No [ ]

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (Section 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes [X] No [ ]

Indicate by check mark whether registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer”, “smaller reporting company”, and “emerging growth company” in Rule 12b-2 of the Exchange Act).

Large accelerated filer [ ]	Accelerated filer [ ]

Non-accelerated filer [X]	Smaller reporting company [X]	Emerging growth company [ ]

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. [ ]

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes [ ] No [X]

Indicate the number of shares outstanding of each of the issuer’s classes of common stock, as of the latest practicable date: 2,975,676 shares of Common Stock, $0.01 par value, at November 13, 2018.

MICROBOT MEDICAL INC.

Index

Part I - Financial Information

Item 1 - Financial Statements

Interim Consolidated Balance Sheets as of September 30, 2018 (unaudited) and December 31, 2017 (audited)	1
Interim Consolidated Statements of Comprehensive Loss for the three and nine months ended September 30, 2018 and 2017 (unaudited)	2
Interim Statements of Shareholders’ Equity as of September 30, 2018 (unaudited) and December 31, 2017 (audited)	3
Interim Consolidated Statements of Cash Flows for the nine months ended September 30, 2018 and 2017 (unaudited)	4
Notes to the Interim Consolidated Financial Statements	5

Item 2 - Management’s Discussion and Analysis of Financial Condition and Results of Operations	16

Item 3 – Quantitative and Qualitative Disclosures About Market Risk	24

Item 4 - Controls and Procedures	24

Part II - Other Information

Item 1 - Legal Proceedings	25

Item 1A - Risk Factors.	26

Item 2 – Unregistered Sales of Equity Securities and Use of Proceeds	27

Item 3 – Defaults Upon Senior Securities	27

Item 4 – Mine Safety Disclosures	28

Item 5 - Other Information	28

Item 6 – Exhibits	28

Signatures	29

MICROBOT MEDICAL INC.

Interim Consolidated Balance Sheets

U.S. dollars in thousands

(Except share data)

	Note	As of September 30, 2018			As of December 31, 2017
		(Unaudited)			(Audited)
ASSETS

Current assets:
Cash and cash equivalents		$	6,673		$	10,787
Restricted cash			27			27
Other current assets			148			116
			6,848			10,930
Fixed assets, net			280			90
Total assets		$	7,128		$	11,020

LIABILITIES AND SHAREHOLDERS’ EQUITY

Current liabilities:
Trade payables		$	194		$	78
Accrued liabilities			363			450
Total current liabilities			557			528
Derivative warrant liability	3		5			28
Total liabilities			562			556

Commitments and contingencies	4

Temporary equity:	5
Common stock of $0.01 par value; issued and outstanding: 721,107 shares as of September 30, 2018 and December 31, 2017			500			500

Shareholders’ equity:
Preferred stock of $0.01 par value; Authorized: 1,000,000 shares as of September 30, 2018 and December 31, 2017; issued and outstanding: 550 and 4,001 shares as of September 30, 2018 and December 31, 2017, respectively	5		(*	)		(*	)
Common stock of $0.01 par value; Authorized: 220,000,000 as of September 30, 2018 and December 31, 2017; issued and outstanding (**): 2,254,569 and 2,013,193 shares as of September 30, 2018, and December 31, 2017, respectively			30			27
Additional paid-in capital			31,771			30,561
Accumulated deficit			(25,735	)		(20,624	)
			6,066			9,964

		$	7,128		$	11,020

	(*)	Less than 1
	(**)	December 31, 2017 share data represents the number of shares adjusted to retroactively reflect the 1:15 reverse stock split effected on September 4, 2018.

The accompanying notes are an integral part of these interim consolidated financial statements.

MICROBOT MEDICAL INC.

Interim Consolidated Statements of Comprehensive Loss

U.S. dollars in thousands

(Except share data)

		Three months ended September 30,						Nine months ended September 30,
	Note	2018			2017			2018			2017

Research and development expenses, net		$	623		$	339		$	1,753		$	900

General and administrative expenses			1,130			896			3,407			2,830

Operating loss			(1,753	)		(1,235	)		(5,160	)		(3,730	)

Financing income (expenses), net			4			48			49			(2,272	)

Net loss		$	(1,749	)	$	(1,187	)	$	(5,111	)	$	(6,002	)

Net loss per share, basic and diluted(*)	6	$	(0.58	)	$	(0.45	)	$	(1.69	)	$	(2.25	)

Weighted-average number of common shares outstanding, basic and diluted (*)			2,947,633			2,383,327			2,876,020			2,061,331

(*)

September 30, 2017 share data represents the number of shares adjusted to retroactively reflect the 1:15 reverse stock split effected on September 4, 2018.

The accompanying notes are an integral part of these interim consolidated financial statements.

MICROBOT MEDICAL INC.

Interim Consolidated Statements of Shareholder’s Equity

U.S. dollars in thousands

(Except share data)

	Preferred A Shares						Common Stock(***)					Additional Paid-In			Accumulated			Total Shareholders’			Temporary
	Number			Amount			Number		Amount			Capital			Deficit			Equity			Equity

Balance, December 31, 2016		9,736		$	(*	)		**1,788,884	$	18		$	14,713		$	(13,035	)	$	1,696		$	500

Issuance of Common Stock		-			-			299,815		3			12,699			-			12,702			-
Share-based compensation		-			-			8,085		(*	)		479			-			479			-
Exercise of options		-			-			31,787		(*	)		(*	)		-			(*	)		-
Cashless exercise of warrants		-			-			24		(*	)		-			-			(*	)		-
Extinguishment of convertible notes and issuance of preferred A shares		3,255			(*	)		-		-			2,676			-			2,676			-
Conversion of preferred A shares to common stock		(8,990	)		(*	)		605,705		6			(6	)		-			-			-
Net loss		-			-			-		-			-			(7,589	)		(7,589	)		-

Balances, December 31, 2017		4,001		$	(*	)		**2,734,300	$	27		$	30,561		$	(20,624	)	$	9,964		$	500
Share-based compensation		-			-					-			1,139			-			1,139			-
Shares issued as consideration-vendor								6,738		1			73			-			74			-
Exercise of options		-			-			2,487		(*	)		-			-			-			-
Conversion of preferred A shares to common stock		(3,451	)		(*)			232,151		2			(2	)		-			-			-
Net loss		-			-			-		-			-			(5,111	)		(5,111	)		-

Balances, September 30, 2018		550		$	(*	)		**2,975,676	$	30		$	31,771		$	(25,735	)	$	6,066		$	500

(*)	Less than 1
(**)	Includes 721,107 common stock classified as temporary equity.
(***)	December 31, 2017 and 2016 share data represents the number of shares adjusted to retroactively reflect the 1:15 reverse stock split effected on September 4, 2018.

The accompanying notes are an integral part of these interim consolidated financial statements.

MICROBOT MEDICAL INC.

Interim Consolidated Statements of Cash Flows

U.S. dollars in thousands

(Except share data)

	Nine months ended September 30,
	2018			2017

OPERATING ACTIVITIES

Net loss	$	(5,111	)	$	(6,002	)

Adjustments to reconcile net loss to net cash used in operating activities:
Depreciation		49			15
Interest and revaluation of convertible notes, net		-			237
Financing loss on debt extinguishment		-			2,364
Changes in fair value of derivative warrant liability		(23	)		(274	)
Shares issued as consideration-vendor		74			-
Share-based compensation expense		1,139			176
Changes in assets and liabilities:
Other receivables		(32	)		29
Other payables and accrued liabilities		29			(92	)

Net cash used in operating activities		(3,875	)		(3,547	)

INVESTMENT ACTIVITIES
Increase in restricted cash		-			-
Purchase of property and equipment		(239	)		(28	)

Net cash used in investing activities		(239	)		(28	)

FINANCING ACTIVITIES

Outflow (inflow) in connection with current assets and liabilities acquired in reverse recapitalization, net		-			(82	)
Issuance of common stock, net of issuance costs		-			12,704

Net cash provided by financing activities		-			12,622

Net increase (decrease) in cash and cash equivalents and restricted cash		(4,114	)		9,047

Cash and cash equivalents and restricted cash at the beginning of the period		10,814			2,709

Cash and cash equivalents and restricted cash at the end of the period	$	6,700		$	11,756

Supplemental disclosure of cash flow information:
Non-cash financing transactions:
Cashless exercise of warrants	$	-		$	(*	)
Conversion of preferred A shares into common shares	$	(*	)	$	(*	)
Extinguishment of convertible notes in exchange for preferred A shares	$	-		$	2,083

(*)	Less than 1

The accompanying notes are an integral part of these interim consolidated financial statements.

NOTE 1 - GENERAL

Description of Business

Microbot Medical Inc. (the “Company”) is a pre-clinical medical device company specializing in the research, design and development of next generation micro-robotics assisted medical technologies targeting the minimally invasive surgery space. The Company is primarily focused on leveraging its micro-robotic technologies with the goal of improving surgical outcomes for patients.

It was incorporated on August 2, 1988 in the State of Delaware under the name Cellular Transplants, Inc. The original Certificate of Incorporation was restated on February 14, 1992 to change the name of the Company to Cyto Therapeutics, Inc. On May 24, 2000, the Certificate of Incorporation as restated was further amended to change the name of the Company to StemCells, Inc.

On November 28, 2016, the Company consummated a transaction pursuant to an Agreement and Plan of Merger, dated August 15, 2016, with Microbot Medical Ltd., a private medical device company organized under the laws of the State of Israel (“Microbot Israel”). On the same day and in connection with the Merger, the Company changed its name from StemCells, Inc. to Microbot Medical Inc. On November 29, 2016, the Company’s common stock began trading on the Nasdaq Capital Market under the symbol “MBOT”.

Prior to the Merger, the Company was a biopharmaceutical company that conducted research, development, and commercialization of stem cell therapeutics and related technologies. The sale of substantially all material assets relating to the stem cell business were completed on November 29, 2016.

The Company and its subsidiaries are collectively referred to as the “Company”. “StemCells” or “StemCells, Inc.” refers to the Company prior to the Merger.

Risk Factors

To date, the Company has not generated revenues from its operations. As of September 30, 2018, the Company had cash and cash equivalent balance of approximately $6,673, which management believes is sufficient to fund its operations for more than 12 months from the date of issuance of these financial statements and sufficient to fund its operations necessary to continue development activities of its current proposed products. Due to continuing research and development activities, the Company expects to continue to incur net losses into the foreseeable future. The Company plans to continue to fund its current operations as well as other development activities relating to additional product candidates, through future issuances of either debt and/or equity securities and possibly additional grants from the Israeli Innovation Authority and others. The Company’s ability to raise additional capital in the equity and debt markets is dependent on a number of factors, including, but not limited to, the market demand for the Company’s stock, which itself is subject to a number of development and business risks and uncertainties, as well as the uncertainty that the Company would be able to raise such additional capital at a price or on terms that are favorable to the Company.

Use of Estimates

The preparation of financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions pertaining to transactions and matters whose ultimate effect on the financial statements cannot precisely be determined at the time of financial statements preparation. Although these estimates are based on management’s best judgment, actual results may differ from these estimates.

Reverse Stock Split

On September 4, 2018, the Company filed a Certificate of Amendment to its Restated Certificate of Incorporation with the Secretary of State of the State of Delaware to affect a one-for-15 reverse stock split of the Company’s common stock (the “Reverse Split”). As a result of the Reverse Split, every 15 shares of the Company’s old common stock was converted into one share of the Company’s new common stock. Fractional shares resulting from the Reverse Split were rounded up to the nearest whole number. The Reverse Split automatically and proportionately adjusted, based on the one-for-fifteen split ratio, all issued and outstanding shares of the Company’s common stock, as well as common stock underlying convertible preferred stock, stock options, warrants and other derivative securities outstanding at the time of the effectiveness of the Reverse Split. The exercise price on outstanding equity based-grants was proportionately increased, while the number of shares available under the Company’s equity-based plans was also proportionately reduced. Share and per share data (except par value) for the periods presented reflect the effects of the Reverse Split. References to numbers of shares of common stock and per share data in the accompanying financial statements and notes thereto for periods ended prior to September 4, 2018 have been adjusted to reflect the Reverse Split on a retroactive basis.

NOTE 2 - SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

The significant accounting policies applied in the preparation of the financial statements are as follows:

Unaudited Interim Financial Statements

The accompanying unaudited interim condensed consolidated financial statements have been prepared in accordance with U.S. GAAP for interim financial information and with the instructions to Form 10-Q and Article 10 of U.S. Securities and Exchange Commission (“SEC”) regulations. Accordingly, they do not include all the information and footnotes required by GAAP for complete financial statements. In the opinion of management, all adjustments considered necessary for a fair presentation have been included (consisting only of normal recurring adjustments except as otherwise discussed).

Operating results for the nine-month period ended September 30, 2018, are not necessarily indicative of the results that may be expected for the year ended December 31, 2018.

Significant Accounting Policies

The significant accounting policies followed in the preparation of these unaudited interim condensed consolidated financial statements are identical to those applied in the preparation of the latest annual audited financial statements.

Recent Accounting Standards

In May 2014, the FASB issued ASU 2014-09 “Revenue from Contracts with Customers” to provide a single comprehensive model for entities to use in accounting for revenue arising from contracts with customers. The ASU supersedes most current revenue recognition guidance, including industry-specific guidance. The FASB subsequently issued ASU 2015-14, ASU 2016-08 and ASU 2016-12, which clarified the guidance, provided scope improvements and amended the effective date of ASU 2014-09. As a result, ASU 2014-09 becomes effective for the Company in the first quarter of 2018, with early adoption permitted. The adoption of this standard did not have a material impact on our interim consolidated statements of comprehensive loss since the Company has not yet generated revenues to date.

In June 2018, the FASB issued ASU No. 2018-07 “Compensation - Stock Compensation (Topic 718): Improvements to Nonemployee Share-Based Payment Accounting.” These amendments expand the scope of Topic 718, Compensation - Stock Compensation (which currently only includes share-based payments to employees) to include share-based payments issued to nonemployees for goods or services. Consequently, the accounting for share-based payments to nonemployees and employees will be substantially aligned. The ASU supersedes Subtopic 505-50, Equity - Equity-Based Payments to Non-Employees. The guidance is effective for the Company during the first quarter of 2019. The Company is assessing ASU 2018-07 and does not expect it to have a material impact on its consolidated financial statements.

In February 2016, the FASB issued ASU 2016-02 “Leases” to increase transparency and comparability among organizations by recognizing lease assets and lease liabilities on the balance sheet and disclosing key information about leasing arrangements. For operating leases, the ASU requires a lessee to recognize a right-of-use asset and a lease liability, initially measured at the present value of the lease payments, on its balance sheet. The ASU retains the current accounting for lessors and does not make significant changes to the recognition, measurement, and presentation of expenses and cash flows by a lessee.

In July 2018, the FASB issued ASU No. 2018-11, “Targeted Improvements - Leases (Topic 842).” This update provides an optional transition method that allows entities to elect to apply the standard prospectively at its effective date, versus recasting the prior periods presented. If elected, an entity would recognize a cumulative-effect adjustment to the opening balance of retained earnings in the period of adoption. This ASU is effective for the Company in the first quarter of 2019, with early adoption permitted. The Company continues to evaluate the effect of the adoption of this ASU and expects the adoption will result in an increase in the assets and liabilities on the consolidated balance sheets for operating leases (refer to Note 4) and will likely have an insignificant impact on the consolidated statements of comprehensive loss.

In June 2016, the FASB issued ASU 2016-13 “Financial Instruments – Credit Losses” to improve information on credit losses for financial assets and net investment in leases that are not accounted for at fair value through net income. The ASU replaces the current incurred loss impairment methodology with a methodology that reflects expected credit losses. This ASU is effective for the Company in the first quarter of 2020, with early adoption permitted. The Company is currently evaluating the effect the adoption of this ASU will have on its consolidated financial statements.

In July 2017, the FASB issued ASU 2017-11, which includes Part I “Accounting for Certain Financial Instruments with Down Round Features” and Part II “Replacement of the Indefinite Deferral for Mandatorily Redeemable Financial Instruments of Certain Nonpublic Entities and Certain Mandatorily Redeemable Non-Controlling Interests with a Scope Exception”. The ASU makes limited changes to the Board’s guidance on classifying certain financial instruments as either liabilities or equity. The ASU’s objective is to improve (1) the accounting for instruments with “down-round” provisions and (2) the readability of the guidance in ASC 480 on distinguishing liabilities from equity by replacing the indefinite deferral of certain pending content with scope exceptions. The ASU is effective for the Company in the first quarter of 2019, with early adoption permitted. The Company has derivative warranty liabilities as discussed in Note 4 which upon adoption of the new standard are expected to be classified as equity.

NOTE 3 - DERIVATIVE WARRANT LIABILITIES

The remaining outstanding warrants and terms as of September 30, 2018 and December 31, 2017 after the split is as follows: (*)

Issuance date	Outstanding as of December 31, 2017		Outstanding as of September 30, 2018		Exercise Price		Exercisable as of September 30, 2018		Exercisable Through

Series A (2013)		3,895		3,895	$	2,885		3,895	October 2018
Series A (2013)		183		183	$	2,725		183	April 2023
Series A (2015)		683		683	$	1,363		683	April 2020
Series A (2016) (a)		625		-	$	-		-	March 2018
Series B (2016) (a)		2,770		2,770	$	40		2,770	March 2022

	(*)	December 31, 2017 warrants data represents the number of shares adjusted to retroactively reflect the 1:15 Reverse Split effected on September 4, 2018
	a)	These warrants contain a full ratchet anti-dilution price protection so that, in most situations upon the issuance of any common stock or securities convertible into common stock at a price below the then-existing exercise price of the outstanding warrants, the warrant exercise price will be reset to the lower common stock sales price. As such anti-dilution price protection does not meet the specific conditions for equity classification, the Company is required to classify the fair value of these warrants as a liability, with changes in fair value to be recorded as income (loss) due to change in fair value of warrant liability. The estimated fair value of our warrant liability at September 30, 2018 and December 31, 2017, was approximately $5 and $28, respectively.

As quoted prices in active markets for identical or similar warrants are not available, the Company uses directly observable inputs in the valuation of its derivative warrant liabilities (level 3 measurement).

The Company uses the Black-Scholes valuation model to estimate fair value of these warrants. In using this model, the Company makes certain assumptions about risk-free interest rates, dividend yields, volatility, expected term of the warrants and other assumptions. Risk-free interest rates are derived from the yield on U.S. Treasury debt securities. Dividend yields are based on our historical dividend payments, which have been zero to date. Volatility is estimated from the historical volatility of our common stock as traded on NASDAQ. The expected term of the warrants is based on the time to expiration of the warrants from the date of measurement.

In March 2017, an institutional holder executed a cashless exercise of 51 warrants and 24 shares of Common Stock were issued in connection therewith.

The following table summarizes the observable inputs used in the valuation of the derivative warrant liabilities as of September 30, 2018 and December 31, 2017:

	Series A (2011)		Series A (2013)		Series A (2013)		Series A (2015)		Series A (2016)			Series B (2016)			Total
Balances at December 31, 2017	$	-	$	-	$	-	$	-	$	(*	)	$	28		$	28
Exercised		-		-		-		-		-			-			-
expiration		-		-		-		-		(*	)		-			(*	)
Changes in fair value		-		-		-		-		-			(23	)		(23	)
Balances at September 30, 2018	$	-	$	-	$	-	$	-	$	-		$	5		$	5

(*)

Less than 1

The following table summarizes the observable inputs used in the valuation of the derivative warrant liabilities as of September 30, 2018 and December 31, 2017:

	As of September 30, 2018				As of December 31, 2017
	Series A (2016)		Series B (2016)		Series A (2016)		Series B (2016)
Share price		—	$	7.52	$	15.1	$	15.1
Exercise price		—	$	40.07	$	40.07	$	40.07
Expected volatility		—		84.9%		60%		119%
Risk-free interest		—		2.39%		1.24%		1.89%
Dividend yield		—		—		—		—
Expected life of up to (years)		—		3.50		0.25		4.25

Activity in such liabilities measured on a recurring basis is as follows:

	Derivative Warrant Liabilities
As of December 31, 2017	$	28
Revaluation of warrants		(23)
As of September 30, 2018	$	5

	Derivative Warrant Liabilities
As of December 31, 2016	$	313
Revaluation of warrants		(285)
Exercise warrants		(*)
As of December 31, 2017	$	28

(*)

Less than 1

In accordance with ASC-820-10-50-2(g), the Company has performed a sensitivity analysis of the derivative warrant liabilities of the Company which are classified as level 3 financial instruments. The Company recalculated the value of warrants by applying a +/- 5% changes to the input variables in the Black-Scholes model that vary overtime, namely, the volatility and the risk-free rate. A 5.0% decrease or ‘increase in volatility would not have materially changed the value of the warrants. A 5.0% decrease or increase in the risk-free rate would not have materially changed the value of the warrants; the value of the warrants is not strongly correlated with small changes in interest rates.

NOTE 4 - COMMITMENTS AND CONTINGENCIES

Microbot Israel obtained from the Israeli Innovation Authority (“IIA”) grants for participation in research and development for the years 2013 through September 30, 2018 in the total amount of approximately $1,310 and, in return, Microbot Israel is obligated to pay royalties amounting to 3% of its future sales up to the amount of the grant. The grant is linked to the exchange rate of the dollar to the New Israeli Shekel and bears interest of Libor per annum.

The repayment of the grants is contingent upon the successful completion of the Company’s research and development programs and generating sales. The Company has no obligation to repay these grants, if the project fails, is unsuccessful or aborted or if no sales are generated. The financial risk is assumed completely by the Government of Israel. The grants are received from the Government on a project-by-project basis.

Microbot Israel signed an agreement with the Technion Research and Development Foundation (“TRDF”) in June 2012 by which TRDF transferred to Microbot Israel a global, exclusive, royalty-bearing license. As partial consideration for the license, Microbot Israel shall pay TRDF royalties on net sales (between 1.5%-3%) and on sublicense income as detailed in the agreement.

Lease Agreements

In December 2016, the Company entered into car lease agreements, which will end on December 31, 2019. According to the lease agreement, the monthly car lease payment is approximately $2.5.

In January 2018, the Company entered into an office lease agreement in the U.S., with a term ending on December 31, 2021. According to the lease agreement, the monthly office lease payment is approximately $4.

In May 2017, the Company entered into an office lease agreement IN Israel effective from February 1, 2018, with a term ending on December 31, 2020. According to the lease agreement, the monthly office lease payment is approximately $14.

Compensation Liability

The Company incurred compensation commitments of approximately $400 to a former executive that management estimates as remote that this amount will ever be paid out and therefore is not reflected in these consolidated financial statements.

Contract Research Agreement

On January 27, 2017, the Company entered into a Contract Research Agreement (the “Research Agreement”) with The Washington University (“Washington U.”), pursuant to which the parties are collaborating to determine the effectiveness of the Company’s self-cleaning shunt.

The study in Washington U. includes several phases. The first phase (initial research) was completed. The parties are in the final stage of planning the next phase, including the related various costs. Pursuant to the Research Agreement, all rights, title and interest in the data, information and results obtained or arrived at by Washington U. in the performance of its services under the Research Agreement, as well as any patentable inventions obtained or arrived at in the performance of such services, will be jointly owned by the Company and Washington U., and each will have full right to practice and grant licenses in joint inventions. Additionally, Washington U. granted to the Company: (a) a non-exclusive, worldwide, royalty-free, fully paid-up, perpetual and irrevocable license to use and practice patentable inventions (other than joint inventions and improvements to Washington U.’s animal models) obtained or arrived at by Washington U. in the provision of its services under the Research Agreement (“University Inventions”) with respect to the self-cleaning shunt; and (b) an exclusive option to obtain an exclusive worldwide license in University Inventions, on terms to be negotiated between the parties.

Litigation

The Company is named as the defendant in a lawsuit, captioned Sabby Healthcare Master Fund Ltd. and Sabby Volatility Warrant Master Fund Ltd., Plaintiffs, against Microbot Medical Inc., Defendant, pending in the Supreme Court of the State of New York, County of New York. The complaint alleges, among other things, that the Company breached multiple representations and warranties contained in the Securities Purchase Agreement (the “SPA”) related to the June 8, 2017 equity financing of the Company (the “Financing”), of which the Plaintiffs participated. The complaint seeks rescission of the SPA and return of the Plaintiffs’ $3,375 purchase price with respect to the Financing, and damages in an amount to be determined at trial, but alleged to exceed $1 million. On August 3, 2018, both Plaintiffs and the Company filed motions for summary judgment. On September 27, 2018, the Court heard oral argument on the parties’ respective summary judgment motions. After oral argument, the Court denied Plaintiffs’ motion in its entirety from the bench. On September 28, 2018, the Court issued a decision granting the Company’s motion for summary judgment regarding Plaintiffs’ claim for monetary damages and denying the Company’s motion for summary judgment on Plaintiffs’ claim for rescission, finding that there were material questions of fact that would need to be resolved at trial. A trial date has not been set.

Management is unable to assess the likelihood of the claim and the amount of potential damages, if any, to be awarded. Management believes that the claims made against it are without merit and intends to vigorously defend itself against these claims.

Tolling and Standstill Agreement

On April 4, 2018, the Company entered into a Tolling and Standstill Agreement (the “Tolling Agreement”) with Empery Asset Master, Ltd., Empery Tax Efficient LP, Empery Tax Efficient II LP, and Hudson Bay Master Fund, Ltd., the other investors in the Financing (the “Other Investors”). Pursuant to the Tolling Agreement, among other things, (a) the Other Investors agree not to bring any claims against the Company arising out of the Matter, (b) the parties agree that if the Company reaches an agreement to settle the claims asserted by the Sabby Funds in the above suit, the Company will provide the same settlement terms on a pro rata basis to the Other Investors, and the Other Investors will either accept same or waive all of their claims and (c) the parties froze in time the rights and privileges of each party as of the effective date of the Tolling Agreement, until (i) an agreement to settle the suit is executed; (ii) a judgment in the suit is obtained; or (iii) the suit is otherwise dismissed with prejudice.

Agreement with CardioSert Ltd.

On January 4, 2018, Microbot Israel entered into an agreement with CardioSert Ltd. (“CardioSert”) to acquire certain patent-protected technology owned by CardioSert (the “Technology”).

Pursuant to the Agreement, Microbot Israel made an initial payment of $50 to CardioSert and has 90-days to elect to complete the acquisition. At the end of the 90-day period, at Microbot Israel’s sole option, CardioSert shall assign and transfer the Technology to Microbot Israel and Microbot Israel shall pay to CardioSert additional amounts and securities as determined in the agreement.

On April 10, 2018, Microbot delivered an Exercise Notice to CardioSert Ltd., notifying it that Microbot elected to exercise the option to acquire the Technology owned by CardioSert and therefore made an additional cash payment of $250 and 6,738 (100,000 common shares before the Reverse Split) common shares estimated of $74. (see note 5).

The agreement may be terminated by Microbot Israel at any time for convenience upon 90-days’ notice. The agreement may be terminated by CardioSert in case the first commercial sale does not occur by the third anniversary of the date of signing of the agreement except if Microbot Israel has invested more than $2,000 in certain development stages, or the first commercial sale does not occur within 50 months. In each of the above termination events, or in case of breach by Microbot Israel, CardioSert shall have the right to buy back the Technology from Microbot Israel for $1.00, upon 60 days prior written notice, but only 1 year after such termination. Additionally, the agreement may be terminated by either party upon breach of the other (subject to cure).

CardioSert agreed to assist Microbot Israel in the development of the Technology for a minimum of one year, for a monthly consultation fee of NIS 40,000 covering up to 60 consulting hours per month.

Agreement with Simon Sharon

Effective as of April 1, 2018, the Company hired Simon Sharon to replace its former Vice President of R&D. Pursuant to the terms thereof, among other things, Mr. Sharon is entitled to options to purchase 10,000 shares (150,000 shares before the Reverse Split) of the Company’s common stock, subject and pursuant to the Company’s 2017 Equity Incentive Plan.

NOTE 5 - SHARE CAPITAL

Each share of the Series A Convertible Preferred Stock, par value $0.01 per share, issued by the Company in December 2016 and in May 2017 (the “Series A Convertible Preferred Stock”), is convertible, at the option of the holder, into 67 shares of Common Stock (1,000 shares of Common Stock before the Reverse Split), and confer upon the holder dividend rights on an as converted basis.

Exercise of Warrants

On March 2017, an institutional holder exercised, in a cashless transaction, 52 warrants (768 warrants before the Reverse Split) and 24 shares (359 shares before the Reverse Split) of Common Stock were issued in connection therewith.

Share Capital Developments

The authorized capital stock consists of 221,000,000 shares of capital stock, which consists of 220,000,000 shares of Common Stock and 1,000,000 shares of undesignated preferred stock, par value $0.01 (the “Preferred Stock”). As of March 31, 2018, the Company had 2,837,863 shares (42,120,127 shares before the Reverse Split) of Common Stock issued and outstanding, and 2,464 shares of Series A Convertible Preferred Stock issued and outstanding.

On December 27, 2016, the Company exchanged 655,962 shares (9,735,925 shares before the Reverse Split) or rights to acquire shares of its Common Stock, for 9,736 shares of a newly designated class of Series A Convertible Preferred Stock.

On January 5, 2017, the Company entered into a definitive securities purchase agreement with an institutional investor (the “Purchaser”) for the purchase and sale of an aggregate of 47,163 shares (700,000 shares before the Reverse Split) of Common Stock in a registered direct offering for $74 per share ($5.00 per share before the Reverse Split) or gross proceeds of $3,500. The Company paid the placement agent a fee of $210 plus reimbursement of out-of-pocket expenses, as well as other offering-related expenses.

On June 5, 2017, the Company entered into a Securities Purchase Agreement with certain institutional investors (the “Investors”) providing for the issuance and sale by the Company to the Investors of an aggregate of 252,658 shares (3,750,000 shares before the Reverse Split) of Common Stock, at a purchase price per share of $40 ($2.70 before the Reverse Split). The gross proceeds to the Company was $10,125 before deducting placement agent fees and offering expenses of $922.

Employee Stock Option Grant

In September 2014, Microbot Israel’s board of directors approved a grant of 26,906 stock options (403,592 stock options before the Reverse Split) (77,846 stock options as retroactively adjusted to reflect the Merger) to its CEO, through MEDX Venture Group LLC. Each option was exercisable into an ordinary share, at an exercise price of $12 ($0.8 before the Reverse Split) ($4.2 as retroactively adjusted to reflect the Merger). The stock options were fully vested at the date of grant.

On May 2, 2016, Microbot Israel’s board of directors approved a grant of 33,333 stock options (500,000 stock options before the Reverse Split) (96,482 as retroactively adjusted to reflect the Merger) to certain of its employees and directors. Each stock option was exercisable into an ordinary share, NIS 0.001 par value, of Microbot Israel, at an exercise price equal to the ordinary share’s par value. The stock options were fully vested at the date of grant. As a result, the Company recognized compensation expenses in the amount of $675 included in general and administrative expenses. As the exercise price of the stock options is nominal, Microbot Israel estimated the fair value of the options as equal to the Company’s share price of $20.25 ($1.35 before the Reverse Split) ($7.05 as retroactively adjusted to reflect the Merger) at the date of grant.

On September 12, 2017, the Company adopted the 2017 Equity Incentive Plan (the “Plan”), which Plan authorizes, among other things, the grant of options to purchase shares of Common Stock to directors, officers and employees of the Company and to other individuals.

On September 14, 2017, the board of directors approved a grant of stock options to purchase an aggregate of up to 120,848 shares (1,812,712 shares before the Reverse Split) of Common Stock to Mr. Harel Gadot, the Company’s Chairman of the Board, President and CEO, at an exercise price per share of $15.75 ($1.05 before the Reverse Split). The stock options vest over a period of 3-5 years as outlined in the option agreements. As a result, the Company recognized compensation expenses in the amount of $460 and $0 included in general and administrative expenses for the nine months ended September 30, 2018 and 2017 respectively.

On September 14, 2017, the board of directors approved a grant of stock options to purchase an aggregate of up to 72,508 shares (1,087,627 shares before the Reverse Split) of Common Stock to Mr. Hezi Himelfarb, the company’s General Manager, COO and a member of the Board, at an exercise price per share of $19.35 ($1.29 before the Reverse Split). The grant was subject to the Israeli Tax Authority’s approval of the plan which occurred on October 14, 2017. In accordance with the option agreement, the options vest for period of 3 years starting from the grand date As a result, the Company recognized compensation expenses in the amount of $329 and $0 included in general and administrative expenses for the nine months ended September 30, 2018 and 2017 respectively.

On December 6, 2017, the board of directors approved a grant of 12,698 stock options (190,475 stock options before the Reverse Split) to purchase an aggregate of up to 12,698 shares of Common Stock to certain of its directors, at an exercise price per share of $15.75 ($1.05 before the Reverse Split). The stock options vest over a period of 3 years as outlined in the option agreements. As a result, the Company recognized compensation expenses in the amount of $55 and $0 included in general and administrative expenses for the nine months ended September 30, 2018 and 2017 respectively.

On December 28, 2017, the board of directors approved a grant of 66,036 stock options (990,543 stock options before the Reverse Split) to purchase an aggregate of up to 66,036 shares of Common Stock to certain of its employees, at an exercise price per share of $15.3 ($1.02 before the Reverse Split). The stock options vest over a period of 3 years as outlined in the option agreements. As a result, the Company recognized compensation expenses in the amount of $273 and $0 included in general and administrative expenses and research and development expenses for the nine months ended September 30, 2018 and 2017 respectively.

On November 2017, certain employees and consultant exercised 31,453 options (471,794 options before the Reverse Split) to 31,453 ordinary shares at exercise price of 0.001 NIS.

In February 2018, an employee exercised options to purchase 2,487 shares (37,300 shares of common stock before the Reverse Split) at an exercise price of $0.001 per share

On August 13, 2018, the board of directors approved a grant of stock options to purchase an aggregate of up to 10,000 shares (150,000 shares before the Reverse Split) of Common Stock to Mr. Simon Sharon, the company’s CTO, at an exercise price per share of $9 ($0.6 before the Reverse Split). The grant was subject to the Israeli Tax Authority’s approval of the plan which occurred on October 14, 2017. In accordance with the option agreement, the options vest for period of 3 years starting from the grand date As a result, the Company recognized compensation expenses in the amount of $22 and $0 included in general and administrative expenses for the nine months ended September 30, 2018 and 2017 respectively.

A summary of the Company’s option activity related to options to employees and directors, and related information is as follows:

	For the nine months ended September 30, 2018
	Number of stock options		Weighted average exercise price		Aggregate intrinsic value

Outstanding at beginning of period		414,965	$	11.70	$	1,859
Granted		10,000		9		-
Exercised		(2,487)		-		-
Cancelled		-		-		-
Outstanding at end of period		422,478	$	11.70	$	729
Vested and expected-to-vest at end of period		228,758	$	7.80	$	729

	For the year ended December 31, 2017(*)
	Number of stock options		Weighted average exercise price		Aggregate intrinsic value
Outstanding at beginning of period		174,328	$	1.95	$	3,739
Granted		272,090		16.50		-
Exercised		(31,453)		-		-
Cancelled		-		-		-
Outstanding at end of period		414,965	$	11.70	$	1,859
Vested and expected-to-vest at end of period		142,875	$	1.95	$	1,375

(*)	December 31, 2017 options data represents the number of shares adjusted to retroactively reflect the 1:15 Reverse Split effected on September 4, 2018.

The aggregate intrinsic value in the table above represents the total intrinsic value (the difference between the fair market value of the Common Stock and the exercise price, multiplied by the number of in-the-money stock options on those dates that would have been received by the stock option holders had all stock option holders exercised their stock options on those dates.) as of September 30, 2018 and December 31, 2017 respectively.

The stock options outstanding as of September 30, 2018 and December 31, 2017, separated by exercise prices, are as follows:

Exercise price $		Stock options outstanding as of September 30, 2018		Stock options outstanding as of December 31, 2017(**)		Weighted average remaining contractual life – years as of September 30, 2018		Weighted average remaining contractual life – years as of December 31, 2017(**)		Stock options exercisable as of September 30, 2018		Stock options exercisable as of December 31, 2017(**)

	4.20		77,846		77,846		7.25		8.00		77,846		77,846
	15.75		133,546		133,546		9.00		9.75		46,117		-
	9.00		10,000		-		10.00		-		-		-
	19.35		72,508		72,508		9.00		9.75		23,565		-
	15.30		66,036		66,036		9.25		10.00		18,688		-
	(*)		62,542		65,029		8.00		8.75		62,542		65,029
			422,478		414,965		8.55		9.3		228,758		142,875

	(*)	Less than $0.01.
	(**)	December 31, 2017 options data represents the number of shares adjusted to retroactively reflect the 1:15 Reverse Split effected on September 4, 2018.

Compensation expense recorded by the Company in respect of its stock-based employee compensation awards in accordance with ASC 718-10 for the nine-month ended September 30, 2018 and 2017 was $ 1,139 and $196, respectively.

The fair value of the stock options is estimated at the date of grant using Black-Scholes options pricing model with the following weighted-average assumptions:

	Nine months ended September 30, 2018		Year ended December 31, 2017
Expected volatility		99.4%		122.5%
Risk-free interest		2.39%		1.64%
Dividend yield		0%		0%
Expected life of up to (years)		5.24		6.25

Shares issued to service provider

In connection with the Merger, the Company issued an aggregate of 525,706 restricted shares (7,802,639 restricted shares before the Reverse Split) of its Common Stock to certain advisors. The fair value of the award of approximately $10,000 was estimated based on the share price of the Common Stock of $19.2 ($1.28 before the Reverse Split) as of the date of grant. The portion of the expense in excess of the cash and other current assets acquired in the Merger, in the amount of $7,300 was included in general and administrative expenses in the Statements of Comprehensive Loss.

During 2017, the Company issued an aggregate of 8,085 nonrefundable shares (120,000 nonrefundable shares before the Reverse Split) of Common Stock to a consultant as part of investor relations services. The Company recorded expenses of approximately $225 with respect to the issuance of these shares included in general and administrative expenses

On May 24, 2018 the Company issued an aggregate of 6,738 nonrefundable shares (100,000 nonrefundable shares before the Reverse Split) of Common Stock to CardioSert as part of certain patent acquisition. The Company recorded expenses of approximately $74 with respect to the issuance of these shares included in research and development expenses.

Securities Exchange Agreement with Alpha Capital

On December 16, 2016, the Company entered into a Securities Exchange Agreement with Alpha Capital, pursuant to which Alpha Capital exchanged 655,967 shares (9,736,000 shares before the Reverse Split) of common stock or rights to acquire shares of the common stock held by it, for 9,736 shares of a newly designated class of Series A Convertible Preferred Stock, par value $0.01 per share (the “Preferred Stock”). The common stock and common stock underlying the rights to acquire common stock include all of the shares of common stock issued or issuable to Alpha Capital pursuant to the Merger. The 655,967 shares (9,735,925 shares before the Reverse Split) of common stock and the rights to acquire common stock were cancelled and the Company’s issued and outstanding shares of Common Stock were reduced to 1,786,684 (26,518,315 before the Reverse Split).

On May 9, 2017, the Company entered into a Securities Exchange Agreement with Alpha Capital pursuant to which the Company agreed to issue 3,254 shares of the Series A Convertible Preferred Stock, in exchange for the full satisfaction, termination and cancellation of the outstanding 6% convertible promissory note of the Company in the principal amount of approximately $2,029 issued on November 28, 2016 and held by Alpha Capital. The Series A Convertible Preferred Stock is the same series of securities as the Company’s existing Series A Convertible Preferred Stock issued in December 2016. As a result of the extinguishment of the convertible note and issuance of the preferred shares, the Company recorded a financial loss in the amount of $2,360.

During the year 2017, the holder of the Series A Convertible Preferred Stock converted 8,990 shares of the Series A Convertible Preferred Stock for 605,705 shares (8,990,000 shares before the Reverse Split) of Common Stock, pursuant to the terms of conversion of the Series A Convertible Preferred Stock.

For the nine-month ended September 30, 2018, the holder of the Series A Convertible Preferred Stock converted 3,451 shares of the Series A Convertible Preferred Stock for 232,151 shares (3,445,266 shares before the Reverse Split) of Common Stock, pursuant to the terms of conversion of the Series A Convertible Preferred Stock.

Repurchase of Shares

The Company intends to enter into a definitive agreement with up to three Israeli shareholders, one of which is a director of the Company, that were former shareholders of Microbot Israel, pursuant to which the Company would repurchase, at a discount on the fair value of the share at the date of repurchase, up to $500 of Common Stock held by them, in the aggregate, if and to the extent such shareholders are unable to sell enough of their shares to cover certain of their Israeli tax liabilities resulting from the Merger. Such repurchase(s), if any, would occur only after the two-year anniversary of the Merger. The transaction is subject to negotiating final terms and entering into definitive agreements with such shareholders.

The Company evaluated whether an embedded derivative that requires bifurcation exists within such shares that may be subject to repurchase. The Company concluded the fair value of such derivative instrument would be nominal and, in any case, would represent an asset to the Company as (a) the settlement requires acquiring the shares at a discount on the fair market value of the share at the time of repurchase and in no circumstances the acquisition price will be higher than approximately one dollar per share (representing 25% discount on the fair market value of the share at the merger closing date) and (b) it is assumed that the selling shareholders would use such right as last resort as such repurchase at a discount on the fair market value of such shares results in a loss to be incurred by the selling shareholders.

In accordance with ASC 480-10-S99-3A (formerly EITF D-98), the Company classified the maximum amount it may be required to pay in the event the repurchase right is exercised ($500) as temporary equity.

NOTE 6 - BASIC AND DILUTED NET LOSS PER SHARE

The basic and diluted net loss per share and weighted average number of common shares used in the calculation of basic and diluted net loss per share are as follows (in thousands, except share and per share data):

	Nine months ended September 30,
	2018		2017(*)
Net loss attributable to shareholders of the Company	$	(5,111)	$	(6,002)
Net loss attributable to shareholders of preferred shares		(226)		(1,442)
Net loss used in the calculation of basic net loss per share	$	(4,885)	$	(4,560)
Net loss per share	$	(1.69)	$	(2.25)
Weighted average number of common shares		2,876,020		2,061,331

(*)

September 30, 2017 shares data represents the number of shares adjusted to retroactively reflect the 1:15 Reverse Split effected on September 4, 2018.

As the inclusion of common share equivalents in the calculation would be anti-dilutive for all periods presented, diluted net loss per share is the same as basic net loss per share.

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Forward Looking Statements

The following discussion should be read in conjunction with our unaudited financial statements and related notes included in Item 1, “Financial Statements,” of this Quarterly Report on Form 10-Q, as well as our Annual Report on Form 10-K for the fiscal year ended December 31, 2017. Certain information contained in this MD&A includes “forward-looking statements.” Statements which are not historical reflect our current expectations and projections about our future results, performance, liquidity, financial condition and results of operations, prospects and opportunities and are based upon information currently available to us and our management and their interpretation of what is believed to be significant factors affecting our existing and proposed business, including many assumptions regarding future events. Actual results, performance, liquidity, financial condition and results of operations, prospects and opportunities could differ materially and perhaps substantially from those expressed in, or implied by, these forward-looking statements as a result of various risks, uncertainties and other factors, including those risks described in detail in the section entitled “Risk Factors” of our Annual Report on Form 10-K for the year ended December 31, 2017.

Forward-looking statements, which involve assumptions and describe our future plans, strategies, and expectations, are generally identifiable by use of the words “may,” “should,” “would,” “will,” “could,” “scheduled,” “expect,” “anticipate,” “estimate,” “believe,” “intend,” “seek,” or “project” or the negative of these words or other variations on these words or comparable terminology.

In light of these risks and uncertainties, and especially given the nature of our existing and proposed business, there can be no assurance that the forward-looking statements contained in this section and elsewhere in this Quarterly Report on Form 10-Q will in fact occur. Potential investors should not place undue reliance on any forward-looking statements. Except as expressly required by the federal securities laws, there is no undertaking to publicly update or revise any forward-looking statements, whether as a result of new information, future events, changed circumstances or any other reason.

Overview

Microbot is a pre-clinical medical device company specializing in the research, design and development of next generation robotic endoluminal surgery devices targeting the minimally invasive surgery space. Microbot is primarily focused on leveraging its micro-robotic technologies with the goal of improving surgical outcomes for patients.

Microbot’s current technological platforms, ViRob^TM, TipCAT^TM and CardioSert^TM, are comprised of proprietary innovative technologies. Using the ViRob platform, Microbot is currently developing its first product candidate: the Self Cleaning Shunt, or SCS^TM, for the treatment of hydrocephalus and Normal Pressure Hydrocephalus, or NPH. Although the SCS utilizes one of our platforms, we are focused on the development of a Multi Generation Pipeline Portfolio utilizing all three of our proprietary technologies.

Microbot has a patent portfolio of 25 issued/allowed patents and 15 patent applications pending worldwide.

Technological Platforms

ViRob

The ViRob is an autonomous crawling micro-robot which can be controlled remotely or within the body. Its miniature dimensions are expected to allow it to navigate and crawl in different natural spaces within the human body, including blood vessels, the digestive tract and the respiratory system as well as artificial spaces such as shunts, catheters, ports, etc. Its unique structure is expected to give it the ability to move in tight spaces and curved passages as well as the ability to remain within the human body for prolonged time. The SCS product was developed using the ViRob technology.

CardioSert

On May 25, 2018, Microbot acquired a patent-protected technology from CardioSert Ltd., a privately-held medical device company based in Israel. The CardioSert^TM technology contemplates a combination of a guidewire and microcatheter, technologies that are broadly used for surgery within a tubular organ or structure such as a blood vessel or duct. The CardioSert^TM technology features a unique guidewire delivery system with steering and stiffness control capabilities which when developed is expected to give the physician the ability to control the tip curvature, to adjust tip load to varying degrees of stiffness in a gradually continuous manner. The CardioSert^TM technology was originally developed to support interventional cardiologists in crossing chronic total occlusions (CTO) during percutaneous coronary intervention (PCI) procedures and has the potential to be used in other spaces and applications, such as peripheral intervention, and neurosurgery. CardioSert^TM was part of a technological incubator supported by the Israel Innovation Authorities (formerly known as the Office of the Chief Scientist, or OCS), and a device based on the technology has successfully completed pre-clinical testing.

TipCAT

The TipCAT is a disposable self-propelled locomotive device that is specially designed to advance in tubular anatomies. The TipCAT is a mechanism comprising a series of interconnected balloons at the device’s tip that provides the TipCAT with its forward locomotion capability. The device can self-propel within natural tubular lumens such as the blood vessels, respiratory and the urinary and GI tracts. A single channel of air/fluid supply sequentially inflates and deflates a series of balloons creating an inchworm like forward motion. The TipCAT maintains a standard working channel for treatments. Unlike standard access devices such as guidewires, catheters for vascular access and endoscopes, the TipCAT does not need to be pushed into the patient’s lumen using external pressure; rather, it will gently advance itself through the organ’s anatomy. As a result, the TipCAT is designed to be able to reach every part of the lumen under examination regardless of the topography, be less operator dependent, and greatly reduce the likelihood of damage to lumen structure. The TipCAT thus offers functionality features equivalent to modern tubular access devices, along with advantages associated with its physiologically adapted self-propelling mechanism, flexibility, and design.

Industry Overview

CSF Management

Hydrocephalus is a medical condition in which there is an abnormal accumulation of cerebrospinal fluid, or CSF, in the brain that can cause increased intracranial pressure. It is estimated that one in every 500 babies are born with hydrocephalus, and over 1,000,000 people in the United States currently live with hydrocephalus.

Symptoms of hydrocephalus vary with age, disease progression and individual tolerance to the condition, but they can include convulsion, tunnel vision, mental disability or dementia-like symptoms and even death. NPH is a type of hydrocephalus that usually occurs in older adults. NPH is generally treated as distinct from other types of hydrocephalus because it develops slowly over time. In NPH, the drainage of CSF is blocked gradually and the excess fluid builds up slowly. This slow accumulation means that the fluid pressure may not be as high as in other types of hydrocephalus. It is estimated that more than 700,000 Americans have NPH, but less than 20% receive an appropriate diagnosis.

Hydrocephalus is most often treated by the surgical insertion of a shunt system. The shunt system diverts the flow of CSF from the brain’s ventricles (or the lumbar subarachnoid space) to another part of the body where the fluid can be more readily absorbed. Hydrocephalus shunt designs have changed little since their introduction in the 1950s. A shunt system typically consists of three parts: the distal tubing or shunt (a flexible and sturdy plastic tube), the ventricular catheter (the proximal catheter), and a valve. The end of the shunt system with the proximal catheter is placed in the ventricles (within the CSF) and the distal catheter is placed in the site of the body where the CSF can be drained. A valve is located along the shunt to maintain and regulate the rate of CSF flow. Current systems can be created from separate components or bought as complete units.

The treatment of hydrocephalus with existing shunt systems often includes complications. For example, approximately 50% of shunts used in the pediatric population fail within two years of placement and repeated neurosurgical operations are often required. Ventricular catheter blockage, or occlusion, is by far the most frequent event that results in shunt failure. Shunt occlusion occurs when there is a partial or complete blockage of the shunt that causes it to function intermittently or not at all. Such a shunt blockage can be caused by the accumulation of blood cells, tissue, or bacteria in any part of the shunt system. In the event of shunt occlusion, CSF begins to accumulate in the brain or lumbar region again and the symptoms of untreated hydrocephalus can reappear until a shunt replacement surgery is performed.

Although several companies are active in the field of hydrocephalus treatment and the manufacturing of shunt systems and shunt components, Microbot believes that the majority of those companies are focusing on the development of valves. The development of a “smart shunt” – a shunt that could provide data to the physician on patient conditions and shunt function with sensor-based controls, or correct the high failure rate of existing shunt systems – is for the most part at an academic and conceptual level only. Reports of smart shunt technologies are typically focused on a subset of components with remaining factors left unspecified, such as hardware, control algorithms or power management. Microbot does not believe that a smart shunt that can prevent functional failures has been developed to date. Because of the limited innovation in this area, Microbot believes an opportunity exists to provide patients suffering from hydrocephalus or NPH with a more effective instrument for treating their condition.

An alternative, short-term solution to hydrocephalus is the implantation of an External Ventricular Drainage, or EVD, an implanted device used in neurosurgery for the short-term treatment and monitoring of elevated intracranial pressure when the normal flow of CSF inside the brain is obstructed. If after using an EVD, the underlying hydrocephalus does not eventually resolve, the EVD may then be converted to a cerebral shunt, a fully internalized, long-term treatment for hydrocephalus.

EVDs are also used in other instances when the normal flow of CSF inside the brain is obstructed, such as a result of head trauma, intracerebral hemorrhage, brain tumors and infection. The EVD serves to divert excess fluids from the brain and allows for the monitoring of intracranial pressure. An EVD must be placed in a center with full neurosurgical capabilities because immediate neurosurgical intervention may be needed if a complication of EVD placement, such as bleeding, is encountered. EVD is one of the most commonly used and most important life-saving procedures in the neurologic ICU, with more than 200,000 neuro-intensive patients requiring EVD insertions annually.

Similar to shunts, EVDs are also prone to occlusion, mostly due to cellular debris, such as blood clots and/or tissue fragments. Studies have shown that approximately 1-7% of EVDs require replacement secondary to occlusion. Current solutions for EVD occlusion include irrigation and replacement, which we believe may be ineffective (in the case of irrigation) or costly (in the case of replacement) and in either case, put the patient at risk of unintended side effects. Microbot believes that with its portfolio of technologies, and its initial pre-clinical results, it is well-positioned to explore and expand its offerings as an alternative solution for EVD occlusion.

Minimally Invasive Endovascular Neurosurgery

Minimally Invasive Surgery, or MIS, refers to surgical procedures performed through tiny incisions instead of a single large opening. Because the incisions are small, patients tend to have quicker recovery times and experience less trauma than with conventional surgery. The global MIS market is expected to exceed $50 billion by 2019, with a CAGR of over 20% through 2023. MIS involves three major category of devices: surgical, monitoring and visualization, and endoscopy. The market for surgical devices, including ablation, electrosurgery and medical robotic systems, accounts for the largest share of revenue and is also expected to show the highest rate of growth.

As a subset of MIS, endovascular neurosurgery refers to surgeries performed by using devices that pass through the blood vessels to diagnose and treat neurological diseases and conditions such as stroke, arteriovenous malformations, aneurysms and atherosclerosis, rather than using open surgery.

The global neurovascular device market was valued at $1.62 billion in 2015 and is expected to reach a value of $2.92 billion by 2024, growing at a CAGR of 6.5%. Increases in the geriatric population and a rise in the number of patients suffering from neurovascular disorders, implementation of advanced technological platforms, and favorable reimbursement policies across established markets are expected to drive this market’s growth. On the other hand, the high cost of the endovascular devices and scarcity of neurovascular surgeons may impede such growth.

Stroke is a devastating condition, affecting 33 million people worldwide every year. In the United States alone, there are nearly 800,000 instances of stroke yearly, with about three in four being first-time strokes. This number is expected to increase to one million annually in 2021. Stroke is the fifth leading cause of death in the United States and is a leading cause of long-term disability, with related care costs estimated at $70 billion annually.

Mechanical thrombectomy has only been approved as a first-line treatment for ischemic stroke since 2016. Prior to such approval, chemical thrombolysis using tissue plasminogen activators was the only first-line treatment available, limiting the therapeutic window for ischemic stroke patients to as little as 3-4 hours from the onset of symptoms. With mechanical thrombectomy, treatment can be started within 6-24 hours of the time the patient was last known to be well. The US mechanical thrombectomy market is projected to grow at a CAGR of 23.9% between 2014-2020, to reach a value over $350 million.

According to the Brain Aneurysm Foundation, an estimated 6 million people in the United States have an unruptured brain aneurysm, or 1 in 50 people. The annual rate of rupture is approximately 8 – 10 per 100,000 people, or about 30,000 people in the United States annually. Embolic coiling is the established gold-standard treatment for aneurysms, and the most established product line in the neurovascular market – it is a strong but relatively stagnant market, projected to grow at a CAGR of 1.7% between 2014-2020, to reach a value of over $800 million. New devices that improve treatment of complex aneurysms, such as embolization-enabling stents, bifurcations stents, flow-diversion stents, liquid embolics and intrasaccular devices, are expected to boost market growth.

The major companies in the field of neurovascular devices include Stryker Corporation, Medtronic Plc., Cerenovus (Johnson & Johnson), Terumo Corporation and Penumbra, Inc. Neurovascular access devices are the means for delivering neurovascular treatment tools and devices from an opening in the femoral or radial arteries into the brain vasculature. Such access devices include sheaths, guidewires and microcatheters. Wires and catheters account for 18.6% of the overall neurovascular market.

Navigating and placing access devices through tortuous and highly delicate brain arteries is a complex procedure that requires high-level surgical skills with specialist training. In many procedures, surgeons exchange numerous access devices before reaching the target and applying the therapeutic agent or device, increasing the risk of adverse events and the exposure of both patient and physician to radiation. Adverse events, such as perforation of brain arteries or the release of embolies from a thrombus or atherosclerotic lesion can have devastating or even fatal results.

Microbot believes that with its portfolio of technologies specifically CardioSert^TM and TipCAT^TM, it is well-positioned to explore and develop such technologies as neurovascular access devices, with a focus on improving the ease and access and enhancing the safety of endovascular neurosurgery.

Our Product Pipeline

Self-Cleaning Shunt

The SCS device is designed to act as the ventricular catheter portion of a CSF shunt system that is used to relieve hydrocephalus and NPH. It is designed to work as an alternative to any ventricular catheter options currently on the market and to connect to all existing shunt system valves currently on the market; therefore, the successful commercialization of the SCS is not dependent on any single shunt system. Initially, Microbot expects the SCS device to be an aftermarket purchase that would be deployed to modify existing products by the end user. Microbot believes that the use of its SCS device will be able to reduce, and potentially eliminate, shunt occlusions, and by doing so, Microbot believes its SCS has the potential to become the gold standard ventricular shunt in the treatment of hydrocephalus and NPH.

The SCS device embeds an internal robotic cleaning mechanism in the lumen, or inside space, of the ventricular catheter which prevents cell accumulation and tissue ingrowth into the catheter. The SCS device consists of a silicone tube with a perforated titanium tip, which connects to a standard shunt valve at its distal end. The internal cleaning mechanism is embedded in the lumen of the titanium tip. Once activated, the cleaning mechanism keeps tissue from entering the catheter perforations while maintaining the CSF flow in the ventricular catheter.

The internal cleaning mechanism of the SCS device is activated by means of an induced magnetic field, which is currently designed to be externally generated by the patient through a user-friendly headset that transmits the magnetic field at a pre-determined frequency and operating sequence protocol. The magnetic field that is created by the headset is then captured by a flexible coil and circuit board that is placed just under the patient’s scalp in the location where the valve is located. The circuit board assembly converts the magnetic field into the power necessary to activate the cleaning mechanism within the proximal part of the ventricular catheter.

Microbot has completed the development of an SCS prototype and is currently completing the safety testing, general proof of concept testing and performance testing for the device, which Microbot began in mid-2013. In May 2018, Microbot announced the results of two pre-clinical studies assessing the SCS, an in-vitro study and a small animal study. The in-vitro study, which was performed at Wayne State University by Dr. Carolyn Harris, supports the SCS’s potential as a viable technology for preventing occlusion in shunts used to treat hydrocephalus. The animal study designed to assess the safety profile of the SCS, which was performed by James Patterson McAllister, PhD, a Professor of Neurosurgery at Washington University School of Medicine in St. Louis, met the primary goal to determine the safety of the SCS device that aims to prevent obstruction in CSF catheters. Since the completion of these initial studies, Microbot has commenced a follow-up study to further evaluate the safety and to investigate the efficacy of the SCS. The follow-up study is also being conducted by leading hydrocephalus experts at Washington University and Wayne State University. The study will include a larger sample size compared to the initial studies and the primary and secondary endpoints will seek to validate the safety and efficacy of the SCS that will be activated in both in-vitro (lab) and in-vivo (animal) models. Microbot plans to use the findings for initial regulatory submissions in the United States, Europe and other jurisdictions, although upon the completion of animal studies, Microbot may conduct clinical trials if they are requested by the FDA or if Microbot decides that the data from such trials would improve the marketability of the product candidate. Microbot believes that the animal study results of its first generation SCS device should be available during the second half of 2019 and we expect to submit that data to the FDA either in a regulatory submission or as part of a pre-submission meeting request, depending on the final results of this ongoing studies. The proposed indication for use of the SCS device would be for the treatment of hydrocephalus as a component of a shunt system when draining or shunting of CSF is indicated. It continues to be possible that the FDA could require us to conduct a human clinical study to support the safety and efficacy of the SCS and that such clinical data would need to be submitted as part of a 510(k) notification to authorize marketing of the medical device in the U.S.

Microbot may also conduct clinical trials for the SCS in other countries where such trials are necessary for Microbot to sell its SCS device in such country’s market, although it has no current plans to do so.

TipCAT

A TipCAT prototype was shown to self-propel and self-navigate in curved plastic pipes and curved ex-vivo colon. In addition, in its first feasibility study, the prototype device was tested in a live animal experiment and successfully self-propelled through segments of the animal’s colon, with no post-procedural damage. All tests were conducted at AMIT (Alfred Mann Institute of Technology at the Technion), prior to the licensing of TipCAT by Microbot.

Microbot is no longer pursuing the development of the TipCAT as a colonoscopy tool but is currently exploring the use of the TipCAT for minimally invasive endovascular neurosurgical applications.

Financial Operations Overview

Microbot has no products approved for commercial sale and has not generated any revenues from product sales since its inception in 2010. From inception to September 30, 2018, Microbot has raised cash proceeds of approximately $18,000,000 to fund operations, primarily from government grants, loans, and private placement offerings of debt and equity securities.

Microbot has never been profitable and has incurred significant operating losses in each year since inception. Net losses for the three and nine months ended September 30, 2018 were approximately $1,749,000 and $5,111,000, respectively, compare to the three and nine months ended September 30, 2017 of $1,187,000 and $6,002,000, respectively. Substantially all of Microbot’s operating losses resulted from expenses incurred in connection with its research and development programs and from general and administrative costs associated with its operations. As of September 30, 2018, Microbot had a net working capital of approximately $6,291,000, consisting primarily of cash and cash equivalents. Microbot expects to continue to incur significant expenses and increasing operating losses for at least the next several years as it continues the clinical development of and seeks regulatory approval for its product candidates. Accordingly, Microbot will continue to require substantial additional capital to continue its clinical development and potential commercialization activities, which it hopes to raise within the next four months to meet its anticipated cash requirements for approximately the 36 months thereafter. Sales of additional equity or equity-linked securities by the Company would result in the dilution of the interests of existing stockholders. There can be no assurance that financing will be available when required. If the Company is unable to so successfully raise capital, this will raise significant doubt about the Company’s ability to continue as a going concern. The amount and timing of Microbot’s future funding requirements will depend on many factors, including the timing and results of its clinical development efforts.

Estimated completion dates and costs for Microbot’s clinical development and research programs can vary significantly for each current and future product candidate and are difficult to predict. As a result, Microbot cannot estimate with any degree of certainty the costs it will incur in connection with development of its product candidates at this point in time. Microbot anticipates it will make determinations as to which programs and product candidates to pursue and how much funding to direct to each program and product candidate on an ongoing basis in response to the scientific success of early research programs, results of ongoing and future clinical trials, its ability to enter into collaborative agreements with respect to programs or potential product candidates, as well as ongoing assessments as to each current or future product candidate’s commercial potential.

Research and Development Expenses

Research and development expenses consist primarily of salaries and related expenses and overhead for Microbot’s research, development and engineering personnel, prototype materials and research studies, and obtaining and maintaining Microbot’s patent portfolio. Microbot expenses its research and development costs as incurred.

General and Administrative Expenses

General and administrative expenses consist primarily of the costs associated with management costs, salaries, professional fees for accounting, auditing, consulting and legal services, and allocated overhead expenses.

Microbot expects that its general and administrative expenses may increase in the future as it expands its operating activities, maintains and expands its patent portfolio, the cost of being a public company and maintaining compliance with exchange listing and SEC requirements. These additional costs include management costs, legal fees, accounting fees, directors’ and officers’ liability insurance premiums and expenses associated with investor relations.

Income Taxes

Microbot has incurred net losses and has not recorded any income tax benefits for the losses. It is still in its development stage and has not yet generated revenues, therefore, it is more likely than not that sufficient taxable income will not be available for the tax losses to be utilized in the future.

Critical Accounting Policies and Significant Judgments and Estimates

Microbot’s management’s discussion and analysis of its financial condition and results of operations are based on its financial statements, which have been prepared in accordance with U.S. generally accepted accounting principles, or GAAP. The preparation of these financial statements requires Microbot to make estimates and judgments that affect the reported amounts of assets, liabilities, and expenses and the disclosure of contingent assets and liabilities at the date of the financial statements. On an ongoing basis, Microbot evaluates its estimates and judgments, including those related to accrued research and development expenses. Microbot bases its estimates on historical experience, known trends and events, and various other factors that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may differ materially from these estimates under different assumptions or conditions.

While Microbot’s significant accounting policies are described in more detail in the notes to its financial statements, Microbot believes the following accounting policies are the most critical for fully understanding and evaluating its financial condition and results of operations.

Fair Value of Financial Instruments

The Company measures the fair value of certain of its financial instruments (such as the derivative warrant liabilities) on a recurring basis.

A fair value hierarchy is used to rank the quality and reliability of the information used to determine fair values. Financial assets and liabilities carried at fair value will be classified and disclosed in one of the following three categories:

	●	Level 1 - Quoted prices (unadjusted) in active markets for identical assets and liabilities.

	●	Level 2 - Inputs other than Level 1 that are observable, either directly or indirectly, such as unadjusted quoted prices for similar assets and liabilities, unadjusted quoted prices in the markets that are not active, or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities.

	●	Level 3 - Unobservable inputs that are supported by little or no market activity and that are significant to the fair value of the assets or liabilities.

Foreign Currency Translation

Microbot’s functional currency is the U.S. dollars, and its reporting currency is the U.S. dollar.

Government Grant and Input Tax Credit Recoveries

From time to time, Microbot has received, and may in the future continue to receive, grants from the Israeli Innovation Authority to cover eligible company expenditures. These are presented as other income in the statement of operations and comprehensive loss as the grant funds are used for or applied towards a number of Microbot’s operating expenses, such as salaries and benefits, research and development and professional and consulting fees. The recoveries are recognized in the corresponding period when such expenses are incurred.

Microbot has also been awarded a non-dilutive grant to continue developing the SCS, from the European Commission. These are presented as other income in the statement of operations and comprehensive loss as the grant funds are used for or applied towards a number of Microbot’s operating expenses, such as salaries and benefits, research and development and professional and consulting fees. The recoveries are recognized in the corresponding period when such expenses are incurred. Microbot may be awarded additional non-dilutive grants in the future.

Research and Development Expenses

Microbot recognizes research and development expenses as incurred, typically estimated based on an evaluation of the progress to completion of specific tasks using data such as clinical site activations, manufacturing steps completed, or information provided by vendors on their actual costs incurred. Microbot determines the estimates by reviewing contracts, vendor agreements and purchase orders, and through discussions with internal clinical personnel and external service providers as to the progress or stage of completion of trials or services and the agreed-upon fee to be paid for such services. These estimates are made as of each balance sheet date based on facts and circumstances known to Microbot at that time. If the actual timing of the performance of services or the level of effort varies from the estimate, Microbot will adjust the estimate accordingly. Nonrefundable advance payments for goods and services, including fees for process development or manufacturing and distribution of clinical supplies that will be used in future research and development activities, are capitalized as prepaid expenses and recognized as expense in the period that the related goods are consumed or services are performed.

Microbot may pay fees to third-parties for manufacturing and other services that are based on contractual milestones that may result in uneven payment flows. There may be instances in which payments made to vendors will exceed the level of services provided and result in a prepayment of the research and development expense.

Comparison of Three and Nine Months Ended September 30, 2018 and 2017

The following table sets forth the key components of Microbot’s results of operations for the three and nine-month periods ended September 30, 2018 and 2017 (in thousands):

	Three months ended September 30,				Increase/		Nine months ended September 30,				Increase/
	2018		2017		(Decrease)		2018		2017		(Decrease)
Research and development expenses, net	$	623	$	339	$	284	$	1,753	$	900	$	853
General and administrative expenses		1,130		896		234		3,407		2,830		577
Financing income (expenses), net		4		48		(44)		49		(2,272)		(2,321)

Research and Development Expenses. Microbot’s research and development expenses were approximately $623,000 and $1,753,000 for the three and nine months ended September 30, 2018, respectively, compared to approximately $339,000 and $900,000 for the corresponding periods in 2017, respectively. The increase in research and development expenses for the three and nine months in 2018 of approximately $284,000 and $853,000, respectively, was primarily due to an increase in share-based compensation and purchase of intellectual property. Microbot expects its research and development expenses to increase over time as it advances its development programs and begins pre-clinical and clinical trials for SCS, TipCAT and CardioSert platforms.

General and Administrative Expenses. General and administrative expenses were approximately $1,130,000 and $3,407,000 for the three and nine months ended September 30, 2018, respectively, compared to approximately $896,000 and $2,830,000 for the corresponding periods in 2017, respectively. The increase in general and administrative expenses for the three and nine months in 2018 of approximately $234,000 and $577,000 respectively, was primarily due to an increase of $907,000 in share-based compensation deducted by decrease in public company expenses and professional services in total amount of $325,000. Microbot believes its general and administrative expenses may increase over time as it advances its programs, increases its headcount and operating activities and incurs expenses associated with being a public company.

Financing Expenses. Financing income (expenses) were approximately $4,000 and $49,000 for the three and nine months ended September 30, 2018, respectively, compared to finance income of approximately $48,000 and finances expenses of $2,272,000 for the corresponding periods in 2017, respectively. The decrease in financial expenses for the three and nine months in 2018 was primarily due to change in fair value of derivative warrant liabilities.

Liquidity and Capital Resources

Microbot has incurred losses since inception and negative cash flows from operating activities for the three and nine months ended September 30, 2018 and the fiscal year ended December 31, 2017. As of September 30, 2018, Microbot had a net working capital of approximately $6,291,000 consisting primarily of cash and cash equivalents. Microbot anticipates that it will continue to incur net losses for the foreseeable future as it continues research and development efforts of its product candidates, hires additional staff, including clinical, scientific, operational, financial and management personnel, and incurs additional costs associated with being a public company.

Microbot has funded its operations through the issuance of capital stock, grants from the Israeli Innovation Authority and other government agencies, and convertible debt. As of September 30, 2018, Microbot raised total cash proceeds of approximately $18,000,000 and incurred a total cumulative loss of approximately $25,735,000 from inception (November 2010) to September 30, 2018.

As a result of the sale of certain of the assets of StemCells, Inc., Microbot’s predecessor company, on November 29, 2016, Microbot received aggregate net cash consideration of approximately $3.1 million. Additionally, in January 2017, we sold an aggregate of 47,163 shares (700,000 shares before the reverse split) of our common stock for net proceeds, after deducting placement agent fees and expenses, of approximately $3.25 million, and in June 2017, we sold an aggregate of 252,658 shares (3,750,000 shares before the reverse split) of our common stock for net proceeds, after deducting placement agent fees and expenses, of approximately $9,300,000.

In November 2017, Microbot was awarded an additional non-dilutive grant of up to 2,610,000 Israeli New Shekels (approximately $735,000) from the Israel Innovation Authority. The grant provides additional sources to be utilized by Microbot for the continued development of the Self-Cleaning Shunt for the treatment of hydrocephalus and Normal Pressure Hydrocephalus. The grant funds may be used for or applied towards a number of research and development expenses, such as employees’ salaries, research and development expenses (including materials, as well as professional and consulting fees. The recoveries are recognized in the corresponding period when such expenses are incurred. With respect to such grant, Microbot is committed to pay royalties, as, if and when it successfully commercializes the SCS and generates revenue from sales of the SCS, at a rate of between 3% to 3.5% on sales proceeds up to the total amount of grants received, linked to the dollar, plus interest at an annual rate of USD LIBOR. Under the terms of the grant and applicable law, Microbot is restricted from transferring any technologies, know-how, manufacturing or manufacturing rights developed using the grant outside of Israel without the prior approval of the Israel Innovation Authority. Microbot has no obligation to repay the grant, if the SCS project fails, is unsuccessful or aborted before any sales are generated. The financial risk is assumed completely by the IIA.

Microbot was also awarded a non-dilutive grant of 50,000€ to continue developing the SCS, from the European Commission, of which 17,000€ were advanced and 33,000€ are expected to be paid after we submit a final report in four months. We can submit an additional request in four months for a higher grant up to 2,000,000€, which, if granted, would be used for the continued development of the SCS. We can give no assurance that we will receive such additional grant.

Microbot believes that its net cash as of September 30, 2018 will be sufficient to fund its operations for at least 12 months and fund operations necessary to continue its development activities during that period.

Microbot plans to continue to fund its research and development and other operating expenses, other development activities relating to additional product candidates, and the associated losses from operations, through future issuances of debt and/or equity securities and possibly additional grants from the Israeli Innovation Authority. Additionally, the Company will require additional capital relating to the acquisition of certain intellectual property assets from CardioSert Ltd., and the planned development and commercialization of such assets. The capital raises from issuances of convertible debt and equity securities could result in additional dilution to Microbot’s shareholders. In addition, to the extent Microbot determines to incur additional indebtedness, Microbot’s incurrence of additional debt could result in debt service obligations and operating and financing covenants that would restrict its operations. Microbot can provide no assurance that financing will be available in the amounts it needs or on terms acceptable to it, if at all. If Microbot is not able to secure adequate additional working capital when it becomes needed, it may be required to make reductions in spending, extend payment terms with suppliers, liquidate assets where possible and/or suspend or curtail planned research programs. Any of these actions could materially harm Microbot’s business.

Cash Flows

The following table provides a summary of the net cash flow activity for period set forth below (in thousands):

	Nine months ended September 30,
	2018		2017
Net cash used in operating activities	$	(3,875)	$	(3,457)
Net cash used in investing activities		(239)		(28)
Net cash provided by financing activities		-		12,622

Cash used in operating activities for the nine months ended September 30, 2018 was approximately $3,875,000, calculated by adjusting net loss from operations by approximately $1,236,000 to eliminate non-cash and expense items not involving cash flows such as depreciation and accumulated interest on convertible loans, as well as other changes in assets and liabilities resulting in non-cash adjustments in the income statement. Cash used in operating activities for nine months ended September 30, 2017 was approximately $3,547,000, calculated by adjusting net loss from operations by approximately $2,455,000.

Net cash used in investing activities for the nine months ended September 30, 2018 was approximately $239,000, consisting of purchase of property and equipment and restricted cash which was deposited for the benefit of lease agreements, compared to approximately $28,000 for the nine months ended September 30, 2017.

Net cash provided by financing activities for the nine months ended September 30, 2018 was $0, compared to approximately $12,622,000 for the nine months ended September 30, 2017. The decrease for all periods presented was due to 2017 capital raising activities that were not repeated thus far in 2018.

Off-Balance Sheet Arrangements

Microbot has no off-balance sheet arrangements that have or are reasonably likely to have a current or future effect on our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources.

Item 3. Quantitative and Qualitative Disclosures About Market Risk

Interest Rate Risk

Microbot’s cash and cash equivalents as of September 30, 2018 consisted of readily available checking and money market funds. Microbot’s primary exposure to market risk is interest income sensitivity, which is affected by changes in the general level of U.S. interest rates. However, because of the short-term nature of the instruments in Microbot’s portfolio, a sudden change in market interest rates would not be expected to have a material impact on Microbot’s financial condition and/or results of operations. Microbot does not believe that its cash or cash equivalents have significant risk of default or illiquidity. While Microbot believes its cash and cash equivalents do not contain excessive risk, Microbot cannot provide absolute assurance that in the future its investments will not be subject to adverse changes in market value. In addition, Microbot maintains significant amounts of cash and cash equivalents at one or more financial institutions that are in excess of federally insured limits.

Foreign Exchange Risks

Our financial statements are denominated in U.S. dollars and financial results are denominated in U.S. dollars, while a significant portion of our business is conducted, and a substantial portion of our operating expenses are payable, in currencies other than the U.S. dollar.

Exchange rate fluctuations may have an adverse impact on our future revenues, if any, or expenses as presented in the financial statements. We may in the future use financial instruments, such as forward foreign currency contracts, in its management of foreign currency exposure. These contracts would primarily require us to purchase and sell certain foreign currencies with or for U.S. dollars at contracted rates. We may be exposed to a credit loss in the event of non-performance by the counterparties of these contracts. In addition, these financial instruments may not adequately manage our foreign currency exposure. Our results of operations could be adversely affected if we are unable to successfully manage currency fluctuations in the future.

Effects of Inflation

Inflation generally affects Microbot by increasing its clinical trial costs. Microbot does not believe that inflation and changing prices had a significant impact on its results of operations for any periods presented herein.

Item 4. Controls and Procedures.

Disclosure Controls and Procedures

We maintain a system of disclosure controls and procedures (as defined in Rule 13a-15(e) under the Exchange Act). As required by Rule 13a-15(b) under the Exchange Act, management of the Company, under the direction of our Chief Executive Officer and Chief Financial Officer, reviewed and performed an evaluation of the effectiveness of design and operation of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Exchange Act) as of September 30, 2018. Based on that review and evaluation, the Chief Executive Officer and Chief Financial Officer, along with the management of the Company, have determined that as of September 30, 2018, the disclosure controls and procedures were effective to provide reasonable assurance that information required to be disclosed by us in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and were effective to provide reasonable assurance that such information is accumulated and communicated to our management, including our principal executive officer and principal financial officer, as appropriate to allow timely decisions regarding required disclosures.

Management’s Annual Report on Internal Control Over Financial Reporting

Our management is responsible for establishing and maintaining effective internal control over financial reporting (as defined in Rule 13a – 15(f) of the Exchange Act). There are inherent limitations to the effectiveness of any internal control, including the possibility of human error and the circumvention or overriding of controls. Accordingly, even effective internal controls can provide only reasonable assurance with respect to financial statement preparation. Further, because of changes in conditions, the effectiveness of internal control may vary over time. We have assessed the effectiveness of our internal controls over financial reporting (as defined in Rule 13a -15(f) of the Exchange Act) as of September 30, 2018, and have concluded that, as of September 30, 2018, our internal control over financial reporting was effective.

This quarterly report does not include an attestation report of our registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation by our registered public accounting firm pursuant to the rules of the Securities and Exchange Commission that permit us to provide only management’s report in this annual report.

Changes in Internal Control Over Financial Reporting

There were no changes in our internal control over financial reporting, identified in connection with the evaluation of such internal control that occurred during our last fiscal quarter that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

PART II

OTHER INFORMATION

Item 1. Legal Proceedings.

From time to time, we may become involved in various lawsuits and legal proceedings, which arise in the ordinary course of business. However, litigation is subject to inherent uncertainties, and an adverse result in these or other matters may arise from time to time that may harm business.

We are named as the defendant in a lawsuit, captioned Sabby Healthcare Master Fund Ltd. and Sabby Volatility Warrant Master Fund Ltd., Plaintiffs, against Microbot Medical Inc., Defendant, pending in the Supreme Court of the State of New York, County of New York (Index No. 654581/2017) (the “Matter”). The suit was initiated on or about June 29, 2017. The complaint alleges, among other things, that Microbot Medical Inc. breached multiple representations and warranties contained in the Securities Purchase Agreement (the “SPA”) related to the June 8, 2017 equity financing of the Company (the “Financing”), of which the Plaintiffs participated. The complaint seeks rescission of the SPA and return of the Plaintiffs’ $3,375,000 purchase price with respect to the Financing, and damages in an amount to be determined at trial, but alleged to exceed $1 million. On August 3, 2018, both Plaintiffs and Defendant filed motions for summary judgment. On September 27, 2018, the Court heard oral argument on the parties’ respective summary judgment motions. After oral argument, the Court denied Plaintiffs’ motion in its entirety from the bench. On September 28, 2018, the Court issued a decision granting the Company’s motion for summary judgment regarding Plaintiffs’ claim for monetary damages and denying the Company’s motion for summary judgment on Plaintiffs’ claim for rescission, finding that there were material questions of fact that would need to be resolved at trial. A trial date has not been set.

On April 4, 2018, we entered into a Tolling and Standstill Agreement (the “Tolling Agreement”) with Empery Asset Master, Ltd., Empery Tax Efficient LP, Empery Tax Efficient II LP, and Hudson Bay Master Fund, Ltd., the other investors in the Financing (the “Other Investors”). Pursuant to the Tolling Agreement, among other things, (a) the Other Investors agree not to bring any claims against us arising out of the Matter, (b) the parties agree that if we reach an agreement to settle the claims asserted by the Sabby Funds in the above suit, we will provide the same settlement terms on a pro rata basis to the Other Investors, and the Other Investors will either accept same or waive all of their claims and (c) the parties froze in time the rights and privileges of each party as of the effective date of the Tolling Agreement, until (i) an agreement to settle the suit is executed; (ii) a judgment in the suit is obtained; or (iii) the suit is otherwise dismissed with prejudice.

We believe that the claims are without merit and intend to continue to defend the action vigorously. However, due to the stage in the ligation process, management is unable to assess the likelihood of the remaining claim and the amount of potential damages, if any, to be awarded. Accordingly, no assurance can be given that any adverse outcome would not be material to our consolidated financial position. Additionally, in the event the court hold for the Plaintiffs in the Matter and we lose our appeals, we will likely be required to use available cash towards payment of damages to the Plaintiffs and the Other Investors, that we otherwise would have used to build our business and develop our technologies into commercial products. In such event, we would be required to raise additional capital sooner than we otherwise would, of which we can give no assurance of success.

Other than the foregoing, we are not currently a party in any legal proceeding or governmental regulatory proceeding nor are we currently aware of any pending or potential legal proceeding or governmental regulatory proceeding proposed to be initiated against us that would have a material adverse effect on us or our business.

Item 1A. Risk Factors.

Microbot’s business depends heavily on the success of its lead product candidate, the SCS. If Microbot is unable to commercialize the SCS or experiences significant delays in doing so, Microbot’s business will be materially harmed.

On January 27, 2017, Microbot entered into a research agreement with Washington University in St. Louis to develop the protocol for and to execute the necessary animal study to determine the effectiveness of the Microbot’s SCS prototype. The initial research was completed in 2017 with a comprehensive study expected to be completed in 2019. Upon the completion of animal studies, Microbot may conduct clinical trials if they are requested by the FDA or if Microbot decides that the data from such trials would improve the marketability of the product candidate. After all necessary clinical and performance data supporting the safety and effectiveness of SCS are collected, Microbot must still obtain FDA clearance or approval to market the device and those regulatory processes can take several months to several years to be completed. Therefore, Microbot’s ability to generate product revenues will not occur for at least the next few years, if at all, and will depend heavily on the successful commercialization of SCS in the treatment of hydrocephalus. The success of commercializing SCS will depend on a number of factors, including the following:

	●	our ability to obtain additional capital;

	●	successful completion of animal studies and, if necessary, human clinical trials and the collection of sufficient data to demonstrate that the device is safe and effective for its intended use;

	●	receipt of marketing approvals or clearances from the FDA and other applicable regulatory authorities;

	●	establishing commercial manufacturing arrangements with one or more third parties;

	●	obtaining and maintaining patent and trade secret protections;

	●	protecting Microbot’s rights in its intellectual property portfolio;

	●	establishing sales, marketing and distribution capabilities;

	●	generating commercial sales of SCS, if and when approved, whether alone or in collaboration with other entities;

	●	acceptance of SCS, if and when commercially launched, by the medical community, patients and third-party payors;

	●	effectively competing with existing shunt and endoscope products on the market and any new competing products that may enter the market; and

	●	maintaining quality and an acceptable safety profile of SCS following clearance or approval.

If Microbot does not achieve one or more of these factors in a timely manner or at all, it could experience significant delays or an inability to successfully commercialize SCS, which would materially harm its business.

Microbot’s ability to expand its technology platforms for other uses, including endovascular neurosurgery other than for the treatment of hydrocephalus, may be limited.

After spending time working with experts in the field, Microbot has recently decided to no longer pursue the use of TipCAT in colonoscopy and has instead committed to focus on expanding all of its technology platforms for use in segments of the endovascular neurosurgery market, including traumatic brain injury, to capitalize on its existing competencies in hydrocephalus and the market’s needs. Microbot’s ability to expand its technology platforms for use in the endovascular neurosurgery market will be limited by its ability to develop and/or refine the necessary technology, obtain the necessary regulatory approvals for their use on humans, and the marketing of its products and otherwise obtaining market acceptance of its product in the United States and in other countries.

Microbot operates in a competitive industry and if its competitors have products that are marketed more effectively or develop products, treatments or procedures that are similar, more advanced, safer or more effective, its commercial opportunities will be reduced or eliminated, which would materially harm its business.

Our competitors that have developed or are developing endoluminal robotics surgical systems include Corindus Vascular Robotics, Inc., Hansen Medical, Inc. Auris Health, Inc., Stereotaxis, Inc., Medrobotics Corporation and others. Our competitors may develop products, treatments or procedures that directly compete with our products and potential products and which are similar, more advanced, safer or more effective than ours. The medical device industry is very competitive and subject to significant technological and practice changes. Microbot expects to face competition from many different sources with respect to the SCS and products that it is seeking to develop or commercialize with respect to its other product candidates in the future.

Competing against large established competitors with significant resources may make establishing a market for any products that it develops difficult which would have a material adverse effect on Microbot’s business. Microbot’s commercial opportunities could also be reduced or eliminated if its competitors develop and commercialize products, treatments or procedures quicker, that are safer, more effective, are more convenient or are less expensive than the SCS or any product that Microbot may develop. Many of Microbot’s potential competitors have significantly greater financial resources and expertise in research and development, manufacturing, preclinical testing, conducting clinical trials, obtaining regulatory approvals and marketing approved products than Microbot may have. Mergers and acquisitions in the medical device industry market may result in even more resources being concentrated among a smaller number of Microbot’s potential competitors.

At this time, Microbot does not know whether the FDA will require it to submit clinical data in support of its future marketing applications for its SCS product candidate, particularly in light of recent initiatives by the FDA to enhance and modernize its approach to medical device safety and innovation, which creates uncertainty for Microbot as well as the possibility of increased product development costs and time to market.

Microbot anticipates that its lead product candidate, the SCS, will be classified by the FDA as Class II and thus be eligible for marketing pursuant to a cleared 510(k) notification. However, there is no guarantee that the FDA will agree with the Company’s determination or that the FDA would accept the predicate device that Microbot intends to submit in its 510(k) notification in order to establish that its new device product is substantially equivalent to one or more predicate devices. The FDA also may request additional data in response to a 510(k) notification, or require Microbot to conduct further testing or compile more data in support of its 510(k) submission. Such additional data could include clinical data that must be derived from human clinical studies that are designed appropriately to address the potential questions from the FDA regarding a proposed product’s safety or effectiveness. It is unclear at this time whether and how various activities recently initiated or announced by the FDA to modernize the U.S. medical device regulatory system could affect the marketing pathway or timeline for our product candidate, given the timing and the undeveloped nature of some of the FDA’s new medical device safety and innovation initiatives. One of the recent initiatives was announced in April 2018, when the FDA Commissioner issued a statement with the release of a Medical Device Safety Action Plan. Among other key areas of the Medical Device Safety Action Plan, the Commissioner stated that the FDA is “exploring what further actions we can take to spur innovation towards technologies that can make devices and their use safer. For instance, our Breakthrough Device Program that helps address unmet medical needs can be used to facilitate patient access to innovative new devices that have important improvements to patient safety. We’re considering developing a similar program to support the development of safer devices that do not otherwise meet the Breakthrough Program criteria, but are clearly intended to be safer than currently available technologies.” This type of program may negatively affect our existing development plan for the SCS product candidate or it may benefit Microbot, but at this time those potential impacts from recent FDA medical device initiatives are unknown and uncertain. Similarly, the FDA Commissioner announced various agency goals under a Medical Innovation Access Plan in 2017.

If the FDA does require clinical data to be submitted as part of the SCS marketing submission, any type of clinical study performed in humans will require the investment of substantial expense, professional resources and time. In order to conduct a clinical investigation involving human subjects for the purpose of demonstrating the safety and effectiveness of a medical device, a company must, among other things, apply for and obtain Institutional Review Board, or IRB, approval of the proposed investigation. In addition, if the clinical study involves a “significant risk” (as defined by the FDA) to human health, the sponsor of the investigation must also submit and obtain FDA approval of an Investigational Device Exemption, or IDE, application. Microbot may not be able to obtain FDA and/or IRB approval to undertake clinical trials in the United States for any new devices Microbot intends to market in the United States in the future. Moreover, the timing of the commencement, continuation and completion of any future clinical trial may be subject to significant delays attributable to various causes, including scheduling conflicts with participating clinicians and clinical institutions, difficulties in identifying and enrolling patients who meet trial eligibility criteria, failure of patients to complete the clinical trial, delay in or failure to obtain IRB approval to conduct a clinical trial at a prospective site, and shortages of supply in the investigational device.

Thus, the addition of one or more mandatory clinical trials to the development timeline for the SCS would significantly increase the costs associated with developing and commercializing the product and delay the timing of U.S. regulatory authorization. The current uncertainty regarding near-term medical device regulatory changes by the FDA could further affect our development plans for the SCS, depending on their nature, scope and applicability. Microbot and its business, financial condition and operating results could be materially and adversely affected as a result of any such costs, delays or uncertainty.

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds.

On September 24, 2018, the holder of the Series A Convertible Preferred Stock, par value $0.01 per share (the “Preferred Stock”), of the Company, converted 450 shares of the Preferred Stock for 30,000 shares of the Company’s common stock. Pursuant to the terms of conversion of the Preferred Stock, each such share is convertible, upon request and for no additional consideration, into 67 shares (1,000 shares before the reverse split) of the common stock of the Company. The issuances of the 30,000 shares of common stock were exempt from registration under Section 4(a)(2) under the Securities Act of 1933, as amended and the rules promulgated thereunder (the “Securities Act”) as transactions not involving a public offering to a single existing stockholder who is an accredited investor, and/or 3(a)(9) under the Securities Act as the Preferred Stock was exchanged for common stock by an existing security holder and no commission or other remuneration was paid.

Item 3. Defaults Upon Senior Securities.

None.

Item 4. Mine Safety Disclosures.

Not applicable.

Item 5. Other Information.

None.

Item 6. Exhibits

The exhibits listed below are hereby furnished to the SEC as part of this report:

31.1		Certification of Harel Gadot, Chairman, President and Chief Executive Officer
31.2		Certification of David Ben Naim, Chief Financial Officer
32.1		Certification of Harel Gadot, Chairman, President and Chief Executive Officer, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
32.2		Certification of David Ben Naim, Chief Financial Officer, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
101.1		XBRL Instance.
101.SCH		XBRL Taxonomy Extension Schema.
101.CAL		XBRL Taxonomy Extension Calculation.
101.DEF		XBRL Taxonomy Extension Definition.
101.LAB		XBRL Taxonomy Extension Labels.
101.PRE		XBRL Taxonomy Extension Presentation.

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized, this 14^th day of November 2018.

	MICROBOT MEDICAL INC.

	By:	/s/ Harel Gadot
	Name:	Harel Gadot
	Title:	Chairman, President and Chief Executive Officer
		(Principal Executive Officer)

	By:	/s/ David Ben Naim
	Name:	David Ben Naim
	Title:	Chief Financial Officer
		(Principal Financial and Accounting Officer)

Exhibit 31.1

Certifications of Principal Executive Officer

Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

I, Harel Gadot, certify that:

	1.	I have reviewed this quarterly report on Form 10-Q of Microbot Medical Inc.;

	2.	Based upon my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

	3.	Based upon my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report;

	4.	The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f) for the registrant and have:

	a.	Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

	b.	Designed such internal controls over financial reporting, or caused such internal controls over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

	c.	Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

	d.	Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

The registrant’s other certifying officer and I have disclosed, based on our most recent evaluation of internal control over financial reporting, to the registrant’s auditors and the audit committee of the registrants’ board of directors (or persons performing the equivalent functions):

	a.	All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

	b.	Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal control over financial reporting.

Dated: November 14, 2018

/s/ Harel Gadot
Chairman, President and Chief Executive Officer

Exhibit 31.2

Certifications of Principal Financial Officer

Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

I, David Ben Naim, certify that:

	1.	I have reviewed this quarterly report on Form 10-Q of Microbot Medical Inc.;

	2.	Based upon my knowledge, this report does not contain any untrue statement of a material fact or omit to state a material fact necessary to make the statements made, in light of the circumstances under which such statements were made, not misleading with respect to the period covered by this report;

	3.	Based upon my knowledge, the financial statements, and other financial information included in this report, fairly present in all material respects the financial condition, results of operations and cash flows of the registrant as of, and for, the periods presented in this report.

	4.	The registrant’s other certifying officer and I are responsible for establishing and maintaining disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e) and internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f) for the registrant and have:

	a.	Designed such disclosure controls and procedures, or caused such disclosure controls and procedures to be designed under our supervision, to ensure that material information relating to the registrant, including its consolidated subsidiaries, is made known to us by others within those entities, particularly during the period in which this report is being prepared;

	b.	Designed such internal controls over financial reporting, or caused such internal controls over financial reporting to be designed under our supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles;

	c.	Evaluated the effectiveness of the registrant’s disclosure controls and procedures and presented in this report our conclusions about the effectiveness of the disclosure controls and procedures, as of the end of the period covered by this report based on such evaluation; and

	d.	Disclosed in this report any change in the registrant’s internal control over financial reporting that occurred during the registrant’s most recent fiscal quarter (the registrant’s fourth fiscal quarter in the case of an annual report) that has materially affected, or is reasonably likely to materially affect, the registrant’s internal control over financial reporting; and

	a.	All significant deficiencies and material weaknesses in the design or operation of internal control over financial reporting which are reasonably likely to adversely affect the registrant’s ability to record, process, summarize and report financial information; and

	b.	Any fraud, whether or not material, that involves management or other employees who have a significant role in the registrant’s internal controls over financial reporting.

Dated: November 14, 2018

/s/ David Ben Naim
Chief Financial Officer

Exhibit 32.1

Certification of Principal Executive Officer

Pursuant to 18 U.S.C. Section 1350, as adopted pursuant to

Section 906 of the Sarbanes-Oxley Act of 2002

I, Harel Gadot, Chairman, President and Chief Executive Officer of Microbot Medical Inc., hereby certify, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that to my knowledge, the quarterly report on Form 10-Q for the period ending September 30, 2018 of Microbot Medical Inc. (the “Form 10-Q”) fully complies with the requirements of Section 13 (a) or 15 (d) of the Securities Exchange Act of 1934 and the information contained in the Form 10-Q fairly presents, in all material respects, the financial condition and results of operations of Microbot Medical Inc.

Dated: November 14, 2018	/s/ Harel Gadot
	Harel Gadot
	Chairman, President and Chief Executive Officer
	(Principal Executive Officer)

Exhibit 32.2

Certification of Principal Financial Officer

Pursuant to 18 U.S.C. Section 1350, as adopted pursuant to

Section 906 of the Sarbanes-Oxley Act of 2002

I, David Ben Naim, Chief Financial Officer of Microbot Medical Inc., hereby certify, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002, that to my knowledge, the quarterly report on Form 10-Q for the period ending September 30, 2018 of Microbot Medical Inc. (the “Form 10-Q”) fully complies with the requirements of Section 13 (a) or 15 (d) of the Securities Exchange Act of 1934 and the information contained in the Form 10-Q fairly presents, in all material respects, the financial condition and results of operations of Microbot Medical Inc.

Dated: November 14, 2018	/s/ David Ben Naim
	David Ben Naim
	Chief Financial Officer
	(Principal Financial Officer)